Multi-Scale Analysis of Fretting Fatigue in Heterogeneous Materials Using Computational Homogenization

This paper deals with modeling of the phenomenon of fretting fatigue in heterogeneous materials using the multi-scale computational homogenization technique and finite element analysis (FEA). The heterogeneous material for the specimens consists of a single hole model (25% void/cell, 16% void/cell and 10% void/cell) and a four-hole model (25% void/cell). Using a representative volume element (RVE), we try to produce the equivalent homogenized properties and work on a homogeneous specimen for the study of fretting fatigue. Next, the fretting fatigue contact problem is performed for 3 new cases of models that consist of a homogeneous and a heterogeneous part (single hole cell) in the contact area. The aim is to analyze the normal and shear stresses of these models and compare them with the results of the corresponding heterogeneous models based on the Direct Numerical Simulation (DNS) method. Finally, by comparing the computational time and % deviations, we draw conclusions about the reliability and effectiveness of the proposed method.     

Application of artificial neural network optimization for resilient ceramic parts fabricated by direct ink writing

Geometries of ceramic parts for high-temperature sealing have great influence on their compression-resilience behaviors. In this work, an accurate and large-scale artificial neural network (ANN) was established to match the relationship between structural parameters and mechanical properties of ZrO₂ parts fabricated by 3D printing. Four geometry parameters of the designed ZrO₂ parts were imported as input and apparent Young's modulus and maximum deformation simulated by finite element method (FEM) were imported as output. FEM calculation provided 400 groups of data for the training of ANN, which greatly improved the predicted accuracy of the network. The predicted results show the mechanical performance of the parts with a range of modulus from 9.24 × 10⁻³ GPa to 100.35 × 10⁻³ GPa and a range of maximum deformation from 2.32% to 5.80% can be forecasted with error less than 8%. Based on the optimized structural parameters, the designed ZrO₂ parts were fabricated by Direct Ink Writing (DIW) technique. The experimental compression-rebound property is comparable to that of ANN prediction. It demonstrates that the combined method of ANN and FEM is a preferable way to optimize the structure and guide the fabrication of complex ceramic parts by 3D printing method.     

含氢类金刚石涂层在船用柴油机柱塞上的应用

利用磁控溅射和等离子增强化学气相沉积复合技术,以 Cr、WC、石墨为靶材,Ar和C₂H₂为工作气体,在船用低速柴油机柱塞上涂覆了过渡层依次为Cr、WC的含氢类金刚石涂层。结果表明:涂层晶体生长良好,结构连续致密,均未出现分层、开裂及剥离的现象;涂层相对光滑,大幅度提高了柱塞表面的纳米硬度与弹性模量,同时降低了在重柴油环境下的摩擦因数,长时间的台架试验后未涂覆涂层的柱塞表面出现非常明显的平行状沟槽磨痕,而且整体磨损比较严重,而涂覆涂层的柱塞表面磨痕非常窄且浅,数量较少,类金刚石涂层可以明显提高柱塞表面的耐磨损性能。     

热冲压工艺参数对22MnB5马氏体钢汽车B柱性能影响的有限元模拟

通过有限元仿真软件Autoform分析了热冲压过程中工艺参数的变化对22MnB5马氏体钢B柱起皱、回弹、减薄、马氏体量以及强度的影响。结果表明:22MnB5马氏体钢B柱热冲压最优化工艺参数为加热温度930 ℃,冷却速率80 ℃/s。该工艺参数下,热冲压过程各处均完成马氏体转变,硬度分布均匀,材料减薄率较低,热冲压成形效果好,尺寸精度高,冲压件强度均大于1400 MPa。     

High‐performance printable paper‐like composites derived from plastic flexible film wastes

Owing to lack of proper recycling methods, plastic flexible film wastes are usually directly discarded or incinerated, which brings about severe environmental pollution. Therefore, converting plastic wastes into value‐added products has received more and more attention in recent years. In this work, paper‐like composites derived from plastic flexible film wastes were prepared via the thermally induced phase separation method by adding polyethylene‐graft‐maleic anhydride (PE‐g‐MAH) as a compatibilizer and fumed silica as an additive. The resulting paper‐like composites were characterized by SEM and infrared spectroscopy. Other properties such as mechanical properties, thermal properties, whiteness, printability and adsorption performance were also tested in detail. It was found that remarkable enhancements in mechanical, thermal and printable properties of the paper‐like composites were obtained when nano‐SiO₂ loading was 2.5–3 wt%. Uniformly distributed holes that can endow good printability by providing space for ink or other functional molecules were observed by using SEM. Furthermore, the CIE whiteness value of the resulting composites can reach 91.6%–96.7% on adding nano‐SiO₂. Additionally, the paper‐like composites integrating nano‐SiO₂ and PE‐g‐MAH exhibited good solid ink affinity and high water or oil adsorption capacity. Thus, according to this research, high‐performance printable paper‐like composites used as major components of multifunctional papers can be prepared based on plastic flexible film wastes. © 2019 Society of Chemical Industry     

基于BIM技术和有限元的检测与分析在PC结构中的应用研究

本文建立了PC结构施工全过程的BIM模型及有限元分析模型,对施工过程进行数值模拟与动态、静态监测,对装配式结构进行了结构性能评价,为结构可视化施工监测提供了技术支持。     

Evolution mechanism of active groups and thermal effects of Chinese lignite in low-temperature oxidation

Abstract

The evolution of active groups at low temperature was examined using Chinese lignite by infrared technology and X-ray photoelectron spectroscopy (XPS). The results showed that the hydroxyl, aliphatic ether, methylene, and methyl groups played important roles in the low-temperature oxidation of lignite below 200?°C. Carbonyl and carboxyl groups were important intermediates. Thus, a multi-step evolution mechanism involving the hydroxyl, aliphatic ether groups, and alkane was reasoned to describe the low-temperature oxidation of lignite. In addition, according to the oxidation kinetics experiment and the evolution laws of the active groups, the ratios of the reaction lines were determined considering the accuracy of thermal effects. The thermal effects and the heat release intensities of each temperature interval were obtained based on the evolution mechanism and the reaction ratios. The shortest spontaneous combustion period of lignite was calculated and compared with the experimental value, which proved that the reasoned evolution mechanism of the active groups and the calculations of the thermal effects were reliable.     

基于HECC的门限群签密研究

分析了已有的门限群签密方案,针对现有方案中抗合谋攻击及身份追查等不足的问题,在(t,n)门限签密的基础上,基于HECC提出了一种可抗合谋攻击、身份可追查的高安全性门限群签密方案。该方案在可抵御合谋攻击的同时,可分辨攻击是来自于群成员还是外部,并可针对群成员的欺诈行为进行身份追查。该方案的安全性是建立在超椭圆曲线离散对数问题的难解性上,在保障安全的同时,也具备了HECC的诸多优点。     

Elastic behaviour and failure mechanism in epoxy syntactic foams: The effect of glass microballoon volume fractions

A representative elementary volume (REV) in epoxy syntactic foams was generated to incorporate randomly distributed glass microballoons that followed a log-normal size distribution. Finite element modelling of the REV foam was developed and experimentally validated to investigate the elastic behaviour and failure mechanism in the foams with different microballoon volume fractions (V). The localised stresses concentrate in various zones within the foam, and can cause the vertical splitting fracture of microballoons and the micro-crack formation in the matrix. Dependent on the microballoon volume fraction, micro-cracks can propagate to join adjacent micro-cracks and voids left by fractured microballoons, and finally develop into a macro-crack either in the preferred longitudinal (for low V) or diagonal (for high V) directions. This is consistent with the macroscopic observations of the fracture process in the foam specimens. It was also found that elastic characteristics of the foam vary with microballoon volume fractions.